Discussion:
[SOGo] Sogo, CentOS 7 & Openchange
Stefan Klatt
2016-03-03 20:55:52 UTC
Permalink
Hi,

did I miss something or is it possible to install this combination?
I didn't found the needed openchange rpms at the repository.

Where is my fault?

Stefan
--
*CaC, Computer and Communication*
Inhaber Stefan Klatt
End-2-End Senior Network Consultant
Triftstrasse 9
60528 Frankfurt
Germany
USt-IdNr.: DE260461592

Tel.: +49-(0)172-6807809
Tel.: +49-(0)69-67808-900
Fax: +49-(0)69-67808-837
Email: ***@cac-netzwerk.de
Profil: http://www.cac-netzwerk.de/profil
Rowland Penny
2016-03-03 21:12:59 UTC
Permalink
Post by Stefan Klatt
Hi,
did I miss something or is it possible to install this combination?
I didn't found the needed openchange rpms at the repository.
Where is my fault?
Stefan
Hi, I think this is probably because what you really need is Centos7,
Sogo, Samba4 AD DC and Openchange. The only problem, there are no Samba4
AD DC rpms yet and you need these to install Openchange.
You could try another OS.

Rowland
--
***@sogo.nu
https://inverse.ca/sogo/lists
Stefan Klatt
2016-03-04 09:12:17 UTC
Permalink
Hi Rowland,

if you take a look at the SOGo documentation Redhat7/CentOS7 ist one of
the useable OS for SOGo and openchange.

Stefan
Post by Rowland Penny
Post by Stefan Klatt
Hi,
did I miss something or is it possible to install this combination?
I didn't found the needed openchange rpms at the repository.
Where is my fault?
Stefan
Hi, I think this is probably because what you really need is Centos7,
Sogo, Samba4 AD DC and Openchange. The only problem, there are no
Samba4 AD DC rpms yet and you need these to install Openchange.
You could try another OS.
Rowland
--
*CaC, Computer and Communication*
Inhaber Stefan Klatt
End-2-End Senior Network Consultant
Triftstrasse 9
60528 Frankfurt
Germany
USt-IdNr.: DE260461592

Tel.: +49-(0)172-6807809
Tel.: +49-(0)69-67808-900
Fax: +49-(0)69-67808-837
Email: ***@cac-netzwerk.de
Profil: http://www.cac-netzwerk.de/profil
Christian Jensen
2016-03-04 00:33:20 UTC
Permalink
Hi.

looking at http://inverse.ca/downloads/SOGo/RHEL5/x86_64/RPMS/ it looks
like all the files are there
have a look at
http://sogo.nu/support/faq/article/how-to-install-sogo-and-sope-through-yum.html
maybe you missed something?

-- Christian
Post by Stefan Klatt
Hi,
did I miss something or is it possible to install this combination?
I didn't found the needed openchange rpms at the repository.
Where is my fault?
Stefan
--
***@sogo.nu
https://inverse.ca/sogo/lists
Stefan Klatt
2016-03-04 09:08:12 UTC
Permalink
Hello Christian,

thats right, but what about REHL7? I think REHL5 ist for Centos/Redhat 5?

Stefan
Post by Christian Jensen
Hi.
looking at http://inverse.ca/downloads/SOGo/RHEL5/x86_64/RPMS/ it
looks like all the files are there
have a look at
http://sogo.nu/support/faq/article/how-to-install-sogo-and-sope-through-yum.html
maybe you missed something?
-- Christian
Post by Stefan Klatt
Hi,
did I miss something or is it possible to install this combination?
I didn't found the needed openchange rpms at the repository.
Where is my fault?
Stefan
--
*CaC, Computer and Communication*
Inhaber Stefan Klatt
End-2-End Senior Network Consultant
Triftstrasse 9
60528 Frankfurt
Germany
USt-IdNr.: DE260461592

Tel.: +49-(0)172-6807809
Tel.: +49-(0)69-67808-900
Fax: +49-(0)69-67808-837
Email: ***@cac-netzwerk.de
Profil: http://www.cac-netzwerk.de/profil
Christian Jensen
2016-03-04 19:07:49 UTC
Permalink
Hi

You are right i looked in the wrong place the packages are missing in
RHEL7 repo

-- Christian
Post by Stefan Klatt
Hello Christian,
thats right, but what about REHL7? I think REHL5 ist for Centos/Redhat 5?
Stefan
Post by Christian Jensen
Hi.
looking at http://inverse.ca/downloads/SOGo/RHEL5/x86_64/RPMS/ it
looks like all the files are there
have a look at
http://sogo.nu/support/faq/article/how-to-install-sogo-and-sope-through-yum.html
maybe you missed something?
-- Christian
Post by Stefan Klatt
Hi,
did I miss something or is it possible to install this combination?
I didn't found the needed openchange rpms at the repository.
Where is my fault?
Stefan
--
***@sogo.nu
https://inverse.ca/sogo/lists
Chris
2016-03-04 19:44:03 UTC
Permalink
Stefan,

According to this thread:

https://lists.inverse.ca/sogo/arc/users/2014-12/msg00196.html

Samba4 not existing for CentOS 7/RHEL 7, has been an issue for SOGO
users, since December 2014!

Anyway, here is a step by step guide on how to install Samba4 on CentOS 7:

http://wiki.eri.ucsb.edu/stadm/AD_Samba4_Centos_7

Once you complete installing Samba4, you should then install the newest
Openchange stable from centos 7 or EPEL repo (assuming the package
exists!), and achieve outlook compatibility.
Post by Stefan Klatt
Hello Christian,
thats right, but what about REHL7? I think REHL5 ist for Centos/Redhat 5?
Stefan
Post by Christian Jensen
Hi.
looking at http://inverse.ca/downloads/SOGo/RHEL5/x86_64/RPMS/ it
looks like all the files are there
have a look at
http://sogo.nu/support/faq/article/how-to-install-sogo-and-sope-through-yum.html
maybe you missed something?
-- Christian
Post by Stefan Klatt
Hi,
did I miss something or is it possible to install this combination?
I didn't found the needed openchange rpms at the repository.
Where is my fault?
Stefan
--
***@sogo.nu
https://inverse.ca/sogo/lists
Rowland Penny
2016-03-04 19:59:17 UTC
Permalink
Post by Chris
Stefan,
https://lists.inverse.ca/sogo/arc/users/2014-12/msg00196.html
Samba4 not existing for CentOS 7/RHEL 7, has been an issue for SOGO
users, since December 2014!
There are Samba4 packages for Centos, there just aren't any Samba4 AD DC
packages.
Post by Chris
http://wiki.eri.ucsb.edu/stadm/AD_Samba4_Centos_7
Please don't follow that link, you will not get the required AD DC if
you follow it, try the Samba wiki:

https://wiki.samba.org/index.php/Setup_a_Samba_Active_Directory_Domain_Controller

Rowland
Post by Chris
Once you complete installing Samba4, you should then install the
newest Openchange stable from centos 7 or EPEL repo (assuming the
package exists!), and achieve outlook compatibility.
Post by Stefan Klatt
Hello Christian,
thats right, but what about REHL7? I think REHL5 ist for
Centos/Redhat 5?
Stefan
Post by Christian Jensen
Hi.
looking at http://inverse.ca/downloads/SOGo/RHEL5/x86_64/RPMS/ it
looks like all the files are there
have a look at
http://sogo.nu/support/faq/article/how-to-install-sogo-and-sope-through-yum.html
maybe you missed something?
-- Christian
Post by Stefan Klatt
Hi,
did I miss something or is it possible to install this combination?
I didn't found the needed openchange rpms at the repository.
Where is my fault?
Stefan
--
***@sogo.nu
https://inverse.ca/sogo/lists
Stefan Klatt
2016-03-08 00:28:16 UTC
Permalink
Hi,

has somebody written a installation guide for CentOS 7?

Regards

Stefan
Post by Rowland Penny
Post by Chris
Stefan,
https://lists.inverse.ca/sogo/arc/users/2014-12/msg00196.html
Samba4 not existing for CentOS 7/RHEL 7, has been an issue for SOGO
users, since December 2014!
There are Samba4 packages for Centos, there just aren't any Samba4 AD
DC packages.
Post by Chris
http://wiki.eri.ucsb.edu/stadm/AD_Samba4_Centos_7
Please don't follow that link, you will not get the required AD DC if
https://wiki.samba.org/index.php/Setup_a_Samba_Active_Directory_Domain_Controller
Rowland
Post by Chris
Once you complete installing Samba4, you should then install the
newest Openchange stable from centos 7 or EPEL repo (assuming the
package exists!), and achieve outlook compatibility.
Post by Stefan Klatt
Hello Christian,
thats right, but what about REHL7? I think REHL5 ist for
Centos/Redhat 5?
Stefan
Post by Christian Jensen
Hi.
looking at http://inverse.ca/downloads/SOGo/RHEL5/x86_64/RPMS/ it
looks like all the files are there
have a look at
http://sogo.nu/support/faq/article/how-to-install-sogo-and-sope-through-yum.html
maybe you missed something?
-- Christian
Post by Stefan Klatt
Hi,
did I miss something or is it possible to install this combination?
I didn't found the needed openchange rpms at the repository.
Where is my fault?
Stefan
--
*CaC, Computer and Communication*
Inhaber Stefan Klatt
End-2-End Senior Network Consultant
Triftstrasse 9
60528 Frankfurt
Germany
USt-IdNr.: DE260461592

Tel.: +49-(0)172-6807809
Tel.: +49-(0)69-67808-900
Fax: +49-(0)69-67808-837
Email: ***@cac-netzwerk.de
Profil: http://www.cac-netzwerk.de/profil
Chris
2016-03-08 19:47:23 UTC
Permalink
Hi Stefan,

Better than an installation guide, it'd be best if somebody would write
an installation script for Samba 4 AD DC!

Probably based on the wiki page referred by Rowland:

https://wiki.samba.org/index.php/Setup_a_Samba_Active_Directory_Domain_Controller

Because IMO, doing these Samba 4 AD DC installations by hand is a waste
of valuable time...
Post by Stefan Klatt
Hi,
has somebody written a installation guide for CentOS 7?
Regards
Stefan
Post by Rowland Penny
Post by Chris
Stefan,
https://lists.inverse.ca/sogo/arc/users/2014-12/msg00196.html
Samba4 not existing for CentOS 7/RHEL 7, has been an issue for SOGO
users, since December 2014!
There are Samba4 packages for Centos, there just aren't any Samba4 AD
DC packages.
Post by Chris
http://wiki.eri.ucsb.edu/stadm/AD_Samba4_Centos_7
Please don't follow that link, you will not get the required AD DC if
https://wiki.samba.org/index.php/Setup_a_Samba_Active_Directory_Domain_Controller
Rowland
Post by Chris
Once you complete installing Samba4, you should then install the
newest Openchange stable from centos 7 or EPEL repo (assuming the
package exists!), and achieve outlook compatibility.
Post by Stefan Klatt
Hello Christian,
thats right, but what about REHL7? I think REHL5 ist for
Centos/Redhat 5?
Stefan
Post by Christian Jensen
Hi.
looking at http://inverse.ca/downloads/SOGo/RHEL5/x86_64/RPMS/ it
looks like all the files are there
have a look at
http://sogo.nu/support/faq/article/how-to-install-sogo-and-sope-through-yum.html
maybe you missed something?
-- Christian
Post by Stefan Klatt
Hi,
did I miss something or is it possible to install this combination?
I didn't found the needed openchange rpms at the repository.
Where is my fault?
Stefan
--
***@sogo.nu
https://inverse.ca/sogo/lists
Rowland Penny
2016-03-08 20:29:27 UTC
Permalink
Post by Chris
Hi Stefan,
Better than an installation guide, it'd be best if somebody would
write an installation script for Samba 4 AD DC!
https://wiki.samba.org/index.php/Setup_a_Samba_Active_Directory_Domain_Controller
Because IMO, doing these Samba 4 AD DC installations by hand is a
waste of valuable time...
Post by Stefan Klatt
Hi,
has somebody written a installation guide for CentOS 7?
Regards
Stefan
Post by Rowland Penny
Post by Chris
Stefan,
https://lists.inverse.ca/sogo/arc/users/2014-12/msg00196.html
Samba4 not existing for CentOS 7/RHEL 7, has been an issue for SOGO
users, since December 2014!
There are Samba4 packages for Centos, there just aren't any Samba4 AD
DC packages.
Post by Chris
http://wiki.eri.ucsb.edu/stadm/AD_Samba4_Centos_7
Please don't follow that link, you will not get the required AD DC if
https://wiki.samba.org/index.php/Setup_a_Samba_Active_Directory_Domain_Controller
Rowland
Post by Chris
Once you complete installing Samba4, you should then install the
newest Openchange stable from centos 7 or EPEL repo (assuming the
package exists!), and achieve outlook compatibility.
Post by Stefan Klatt
Hello Christian,
thats right, but what about REHL7? I think REHL5 ist for
Centos/Redhat 5?
Stefan
Post by Christian Jensen
Hi.
looking at http://inverse.ca/downloads/SOGo/RHEL5/x86_64/RPMS/ it
looks like all the files are there
have a look at
http://sogo.nu/support/faq/article/how-to-install-sogo-and-sope-through-yum.html
maybe you missed something?
-- Christian
Post by Stefan Klatt
Hi,
did I miss something or is it possible to install this combination?
I didn't found the needed openchange rpms at the repository.
Where is my fault?
Stefan
It is not quite as simple as that, I am sorry to say, as far as I can
see the latest Openchange package is version 2.3. This is only
compatible with Samba 4.1.18 and you will need to build samba in a
different way to that show on the Samba wiki. The last time I looked,
Openchange provided a script to download and build Samba, but the only
problem (if you can call it 'only') is that Samba 4.4.0 is planned to be
released next Tuesday (15th March) and when this is released, samba
4.1.x will go EOL and will receive no more updates.

If you follow Openchanges 'cookbook', this will install all the required
packages you need.

Rowland
--
***@sogo.nu
https://inverse.ca/sogo/lists
Stefan Klatt
2016-03-11 12:00:35 UTC
Permalink
Hi Rowland,

by the way.... has somebody written one or more playbooks (SOGo,
openchange, Samba DC, nginx, exim, dovecot...) for ansible?
Better then simple scripts

Regards

Stefan
Post by Rowland Penny
Post by Chris
Hi Stefan,
Better than an installation guide, it'd be best if somebody would
write an installation script for Samba 4 AD DC!
https://wiki.samba.org/index.php/Setup_a_Samba_Active_Directory_Domain_Controller
Because IMO, doing these Samba 4 AD DC installations by hand is a
waste of valuable time...
Post by Stefan Klatt
Hi,
has somebody written a installation guide for CentOS 7?
Regards
Stefan
Post by Rowland Penny
Post by Chris
Stefan,
https://lists.inverse.ca/sogo/arc/users/2014-12/msg00196.html
Samba4 not existing for CentOS 7/RHEL 7, has been an issue for SOGO
users, since December 2014!
There are Samba4 packages for Centos, there just aren't any Samba4 AD
DC packages.
Post by Chris
http://wiki.eri.ucsb.edu/stadm/AD_Samba4_Centos_7
Please don't follow that link, you will not get the required AD DC if
https://wiki.samba.org/index.php/Setup_a_Samba_Active_Directory_Domain_Controller
Rowland
Post by Chris
Once you complete installing Samba4, you should then install the
newest Openchange stable from centos 7 or EPEL repo (assuming the
package exists!), and achieve outlook compatibility.
Post by Stefan Klatt
Hello Christian,
thats right, but what about REHL7? I think REHL5 ist for
Centos/Redhat 5?
Stefan
Post by Christian Jensen
Hi.
looking at http://inverse.ca/downloads/SOGo/RHEL5/x86_64/RPMS/ it
looks like all the files are there
have a look at
http://sogo.nu/support/faq/article/how-to-install-sogo-and-sope-through-yum.html
maybe you missed something?
-- Christian
Post by Stefan Klatt
Hi,
did I miss something or is it possible to install this
combination?
I didn't found the needed openchange rpms at the repository.
Where is my fault?
Stefan
It is not quite as simple as that, I am sorry to say, as far as I can
see the latest Openchange package is version 2.3. This is only
compatible with Samba 4.1.18 and you will need to build samba in a
different way to that show on the Samba wiki. The last time I looked,
Openchange provided a script to download and build Samba, but the only
problem (if you can call it 'only') is that Samba 4.4.0 is planned to
be released next Tuesday (15th March) and when this is released, samba
4.1.x will go EOL and will receive no more updates.
If you follow Openchanges 'cookbook', this will install all the
required packages you need.
Rowland
--
*CaC, Computer and Communication*
Inhaber Stefan Klatt
End-2-End Senior Network Consultant
Triftstrasse 9
60528 Frankfurt
Germany
USt-IdNr.: DE260461592

Tel.: +49-(0)172-6807809
Tel.: +49-(0)69-67808-900
Fax: +49-(0)69-67808-837
Email: ***@cac-netzwerk.de
Profil: http://www.cac-netzwerk.de/profil
Loading...